NANOPROOF NANO-2 (MARBLE AND GRANITE SEALER)

DESCRIPTION

Nanoproof NANO-2 is a solvent-based fluorocarbon resin which imparts water-repellant and oil repellant properties to the substrate to which it is applied.

Nanoproof NANO-2 is an impregnating sealer which does not interfere with the vapour transpiration of water from substrates ie. it allows the substrate to breathe. It can be applied to vertical and horizontal surfaces.

AREAS OF APPLICATION

• Marble, granite, travertine and low porosity natural stone to impart water,oil and dirt repellancy.
• Concrete, fibrous cement, synthetic stone to allow easier removal of dirt, grease etc.
• Unglazed ceramic tiles for easy care

INSTRUCTIONS FOR USE


1. ensure that the surface is dry and clean and dust free
2. wait for at least 14 days before applying to newly layed surfaces
3. ensure adequate ventilation if applying indoors
4. no dilution is required
5. apply using a brush or sprayer onto the surface to be treated
6. wait for 10 minutes and buff the surface
7. steaks and residue can be buffed with a microfiber cloth
8. product dries rapidly but allow at least 2-3 hours before allowing traffic onto the area. Full cure after 24-48 hours
9. In most cases a single application is sufficient. A second coat can be applied in heavy traffic areas.
10. Re-apply as necessary

NOTE :
OVERAPPLICATION CAN CAUSE A SHADE CHANGE.

It is advisable to carry out tests prior to application.
Please note : The information is furnished free of charge and is based on information that Nanoproof believes to be generally reliable and accurate. Individual facts and circumstances may differ. It is intended for your use at your own risk. Because conditions of use are outside our control, we make no warrantees, express or implied and assume no liability in connection with any use of this information.

BENEFITS

  • Water repellent
  • Oil repellent
  • Protection against moss
  • Long lasting
  • Single coat application
  • Allows surface to breathe
  • No surface film
  • Stain resistance
  • No change to the surface applied to